We provide rapid plastic injection moulding tools and plastic injection moulding parts in various industries. For a quick turnaround we can make an aluminium mould which cuts the lead-time and cost, but does no compromise quality. Additionally, we can use a “Master Unit Die”. Using this method, quality moulds can be produced with a very short lead-time at a very competitive price. Rapid injection tooling is often used as a “bridge” between plastic prototypes and production injection moulded parts. We pride ourselves on our excellent communication and customer focused mentality.
Rapid Injection moulding means that we can make a simple injection mould at lower cost, shorter lead time compared againt the mass production moulds without sacrifice product quality. The rapid injection mould is commonly used to fill in the gap between the rapid prototype and mass production parts, this is a proved better way to produce customized plastic products at low volume, or to further evalute product design and process capability of a new product before mass production.
Design For Manufacturing
Design For Manufacturing (DFM) is an essential part of the product development cycle. This process is always best carried out at the design/prototype stage, in order to keep overall product manufacturing cost to a minimum. We will do this as a matter of course for all rapid injection tooling inquiries.
There is no substitute for experience, and our experience has taught us to make moulds in a metal on condition for critical areas. Once the DFM is complete and mould layout is agreed, including position and type of gate, ejector pins position and parting line position are agreed, we make a mould and aim for holes to be small and walls to be thin, so that we can finely adjust the sizes to create parts of the correct geometry quickly. This way, we can get first off samples to you, and on your desk in a matter of days, often as quickly as 7-10 days if time is critical.
Surface Texture
Textures on a plastic product give a part the appearance of sandblasting, wood, leather or others effect designed by customer. If you require your parts to be textured, please just send us the specification, like Mold-Tech texture standards. We can apply textures of all kinds normally used in plastic injection moulding. For the rapid tooling, If you do not have specific requirement of your product appearance, we can apply direct sandblasting with different media size on the mould, this is a quick and cost effective way for rapid injection moulds.
Plastic Material Selection
We can produce parts in most kinds of injection mould-able plastics including a wide selection of engineering plastics for high performance components and also all general plastic materials. We can also provide 2 shot parts and over moulded parts according to your needs. In addition to plastic parts, we also provide compression and injection moulded rubber parts in a wide rage of materials including: EPDM, FKM, NBR, PU, Q, to name a few!
Rapid injection moulding process or moulded plastic products are widely applied in many industries, including most of commerical products, like home appliance industry, office accessories industry, electrical tools, auto industries and electronic devices.
| Material Name | Density | Shrink Rate% |
| ABS (Acrylonitrile Butadiene Styrene) | 1.05 – 1.18 | 0.50- 0.70 |
| PP (Polypropylene) | 0.90 – 0.92 | 1.00 – 2.50 |
| PC (Polycarbonate) | 1.18 – 1.22 | 0.50 – 0.80 |
| PA/Nylon (Polyamide) | 1.05 – 1.15 | 0.80 – 2.20 |
| PVC (Polyvinyl Chloride) | 1.10 – 1.70 | 0.30 – 1.30 |
| POM (Polyoxymethylene) | 1.40 – 1.42 | 0.20 – 0.25 |
| PMMA (Polymethyl methacrylate) | 1.17 – 1.20 | 0.20 – 0.60 |
| HDPE (High Density Polyethylene) | 0.94 – 0.97 | 1.50 – 3.00 |
Expert Engineering and Product Development for Inner South, Australian Capital Territory Businesses
We're proud to serve the thriving businesses of Inner South, Australian Capital Territory, and it's an honour to bring our expertise to the local community.
As a multidisciplinary engineering and product development company established in 2001, we've earned a reputation for delivering innovative solutions that meet the unique needs of clients across Australia. Our foundation in mathematics and science-based disciplines enables us to approach every project with curiosity, creativity, and a commitment to excellence.
In Inner South, Australian Capital Territory, businesses are at the heart of our community. We understand that local companies require reliable partners who can collaborate effectively to drive growth and progress. That's where we come in – experts in engineering and product development based in Inner South, Australian Capital Territory, operating throughout the region.
We take pride in cultivating long-term relationships with our clients, listening attentively to their needs and concerns before developing tailored solutions that meet those specific requirements. Our collaborative approach allows us to bridge the gap between technology and industry, ensuring seamless integration of innovative products into your daily operations.
Maintaining a strong national presence has allowed us to stay ahead of the curve in terms of skills and expertise – a vital asset for businesses operating in diverse markets like Inner South, Australian Capital Territory. By staying abreast of industry trends, best practices, and the latest technologies, we empower local companies with the confidence they need to tackle complex challenges.
We're passionate about building connections that foster growth, innovation, and progress within our community. In partnership with you, business leaders from Inner South, Australian Capital Territory can tap into COLETEK's collective expertise to overcome obstacles and seize new opportunities. Together, we can achieve remarkable results that drive positive change throughout the region.
