We provide rapid plastic injection moulding tools and plastic injection moulding parts in various industries. For a quick turnaround we can make an aluminium mould which cuts the lead-time and cost, but does no compromise quality. Additionally, we can use a “Master Unit Die”. Using this method, quality moulds can be produced with a very short lead-time at a very competitive price. Rapid injection tooling is often used as a “bridge” between plastic prototypes and production injection moulded parts. We pride ourselves on our excellent communication and customer focused mentality.
Rapid Injection moulding means that we can make a simple injection mould at lower cost, shorter lead time compared againt the mass production moulds without sacrifice product quality. The rapid injection mould is commonly used to fill in the gap between the rapid prototype and mass production parts, this is a proved better way to produce customized plastic products at low volume, or to further evalute product design and process capability of a new product before mass production.
Design For Manufacturing
Design For Manufacturing (DFM) is an essential part of the product development cycle. This process is always best carried out at the design/prototype stage, in order to keep overall product manufacturing cost to a minimum. We will do this as a matter of course for all rapid injection tooling inquiries.
There is no substitute for experience, and our experience has taught us to make moulds in a metal on condition for critical areas. Once the DFM is complete and mould layout is agreed, including position and type of gate, ejector pins position and parting line position are agreed, we make a mould and aim for holes to be small and walls to be thin, so that we can finely adjust the sizes to create parts of the correct geometry quickly. This way, we can get first off samples to you, and on your desk in a matter of days, often as quickly as 7-10 days if time is critical.
Surface Texture
Textures on a plastic product give a part the appearance of sandblasting, wood, leather or others effect designed by customer. If you require your parts to be textured, please just send us the specification, like Mold-Tech texture standards. We can apply textures of all kinds normally used in plastic injection moulding. For the rapid tooling, If you do not have specific requirement of your product appearance, we can apply direct sandblasting with different media size on the mould, this is a quick and cost effective way for rapid injection moulds.
Plastic Material Selection
We can produce parts in most kinds of injection mould-able plastics including a wide selection of engineering plastics for high performance components and also all general plastic materials. We can also provide 2 shot parts and over moulded parts according to your needs. In addition to plastic parts, we also provide compression and injection moulded rubber parts in a wide rage of materials including: EPDM, FKM, NBR, PU, Q, to name a few!
Rapid injection moulding process or moulded plastic products are widely applied in many industries, including most of commerical products, like home appliance industry, office accessories industry, electrical tools, auto industries and electronic devices.
| Material Name | Density | Shrink Rate% |
| ABS (Acrylonitrile Butadiene Styrene) | 1.05 – 1.18 | 0.50- 0.70 |
| PP (Polypropylene) | 0.90 – 0.92 | 1.00 – 2.50 |
| PC (Polycarbonate) | 1.18 – 1.22 | 0.50 – 0.80 |
| PA/Nylon (Polyamide) | 1.05 – 1.15 | 0.80 – 2.20 |
| PVC (Polyvinyl Chloride) | 1.10 – 1.70 | 0.30 – 1.30 |
| POM (Polyoxymethylene) | 1.40 – 1.42 | 0.20 – 0.25 |
| PMMA (Polymethyl methacrylate) | 1.17 – 1.20 | 0.20 – 0.60 |
| HDPE (High Density Polyethylene) | 0.94 – 0.97 | 1.50 – 3.00 |
Solutions for Businesses in Moonbi, New South Wales, Australia
Located just outside of Tamworth in the heart of northern New South Wales, Moonbi is a picturesque town surrounded by natural beauty and rich history. As local businesses look to innovate and grow, they need trusted partners who can provide expert guidance and support. That's where COLETEK comes in – a multidisciplinary Australian engineering and product development company established in 2001 with a national reputation built on reliability, collaboration, and capability.
Our team is based in Moonbi, New South Wales, Australia, and we take pride in serving businesses across the region. We understand the unique challenges that come with operating in this part of the country – from the effects of drought to the importance of strong agricultural industries. That's why we've developed a deep appreciation for the people and organisations that call Moonbi home.
At COLETEK, we believe that our clients are more than just customers – they're partners who share our commitment to delivering high-quality solutions. Our expertise spans a broad range of areas, from product development and engineering design to manufacturing and testing. We work closely with businesses in Moonbi, New South Wales, Australia, and throughout the country to help them overcome obstacles, seize opportunities, and achieve their goals.
What sets us apart is our ability to operate across multiple disciplines, bringing together experts from various fields to create innovative solutions that meet specific needs. We're not just a single-trick pony; we're a multidisciplinary team dedicated to delivering exceptional results for our clients. And it's this combination of expertise, experience, and collaboration that has earned us a reputation as one of Australia's most trusted and respected engineering and product development companies.
In Moonbi, New South Wales, Australia, and across the country, we're committed to being a valued partner for businesses looking to succeed. Whether you need help developing new products, improving manufacturing processes, or solving complex technical challenges, we're here to provide tailored support that drives results. Let's build something remarkable together.
