We provide rapid plastic injection moulding tools and plastic injection moulding parts in various industries. For a quick turnaround we can make an aluminium mould which cuts the lead-time and cost, but does no compromise quality. Additionally, we can use a “Master Unit Die”. Using this method, quality moulds can be produced with a very short lead-time at a very competitive price. Rapid injection tooling is often used as a “bridge” between plastic prototypes and production injection moulded parts. We pride ourselves on our excellent communication and customer focused mentality.
Rapid Injection moulding means that we can make a simple injection mould at lower cost, shorter lead time compared againt the mass production moulds without sacrifice product quality. The rapid injection mould is commonly used to fill in the gap between the rapid prototype and mass production parts, this is a proved better way to produce customized plastic products at low volume, or to further evalute product design and process capability of a new product before mass production.
Design For Manufacturing
Design For Manufacturing (DFM) is an essential part of the product development cycle. This process is always best carried out at the design/prototype stage, in order to keep overall product manufacturing cost to a minimum. We will do this as a matter of course for all rapid injection tooling inquiries.
There is no substitute for experience, and our experience has taught us to make moulds in a metal on condition for critical areas. Once the DFM is complete and mould layout is agreed, including position and type of gate, ejector pins position and parting line position are agreed, we make a mould and aim for holes to be small and walls to be thin, so that we can finely adjust the sizes to create parts of the correct geometry quickly. This way, we can get first off samples to you, and on your desk in a matter of days, often as quickly as 7-10 days if time is critical.
Surface Texture
Textures on a plastic product give a part the appearance of sandblasting, wood, leather or others effect designed by customer. If you require your parts to be textured, please just send us the specification, like Mold-Tech texture standards. We can apply textures of all kinds normally used in plastic injection moulding. For the rapid tooling, If you do not have specific requirement of your product appearance, we can apply direct sandblasting with different media size on the mould, this is a quick and cost effective way for rapid injection moulds.
Plastic Material Selection
We can produce parts in most kinds of injection mould-able plastics including a wide selection of engineering plastics for high performance components and also all general plastic materials. We can also provide 2 shot parts and over moulded parts according to your needs. In addition to plastic parts, we also provide compression and injection moulded rubber parts in a wide rage of materials including: EPDM, FKM, NBR, PU, Q, to name a few!
Rapid injection moulding process or moulded plastic products are widely applied in many industries, including most of commerical products, like home appliance industry, office accessories industry, electrical tools, auto industries and electronic devices.
| Material Name | Density | Shrink Rate% |
| ABS (Acrylonitrile Butadiene Styrene) | 1.05 – 1.18 | 0.50- 0.70 |
| PP (Polypropylene) | 0.90 – 0.92 | 1.00 – 2.50 |
| PC (Polycarbonate) | 1.18 – 1.22 | 0.50 – 0.80 |
| PA/Nylon (Polyamide) | 1.05 – 1.15 | 0.80 – 2.20 |
| PVC (Polyvinyl Chloride) | 1.10 – 1.70 | 0.30 – 1.30 |
| POM (Polyoxymethylene) | 1.40 – 1.42 | 0.20 – 0.25 |
| PMMA (Polymethyl methacrylate) | 1.17 – 1.20 | 0.20 – 0.60 |
| HDPE (High Density Polyethylene) | 0.94 – 0.97 | 1.50 – 3.00 |
Making a Difference in Albert, New South Wales, Australia: COLETEK's Commitment to Local Businesses
Let’s build something remarkable together.
Contact UsInjection Moulding Services for Albert – Our Clients: Big Brands & Small Businesses
Injection Moulding Services for Albert – Amazing Customer Testimonials
COLETEK installed real-time wireless security camera systems within our seven Holiday Parks, consisting of 31 cameras spread over multiple buildings and locations. I found the team at COLETEK to be very professional throughout the installation process and the completed system to be highly proficient for our business. I would recommend using COLETEK for your security needs.
COLETEK installed a real-time wireless security camera system for us consisting of 40 indoor and outdoor cameras over 10 buildings throughout the resort and service station. Their team was very professional from quote to completion of the job, and after sales service. The system has reduced vandalism and theft to almost nothing. We have been very happy with the installation and service. We would recommend COLETEK to anyone.
Very reliable, professional and knowledgeable. In our office were we all amazed by Luke's knowledge of IT and how much he know about different IT issues, specially about the IP cameras. We recommend their services and we will always use their services in the future.
We found COLETEK to be very knowledgeable and professional in the installation of our security system, even after the job has been completed COLETEK is always happy to follow up with any questions that may arise.. I would highly recommend COLETEK for anyone looking at security for peace of mind.
Great service, great equipment.
Thank you for installing the surveillance system at our home in the Northern Rivers. It gives us a great sense of security to know that our home and possesses can be monitored remotely and all activities recorded. Thanks also for giving up your time on the weekend to arrange for back up parts to be picked up following storm damage.
We can't thank COLETEK enough for setting up our security systems and ensuring the safety of our assets. They were great to deal with and were extremely responsive in all aspects. We would highly recommend their services to anyone searching for true expertise and exceptional customer service.
COLETEK installed a security camera system in our food processing facility that included 89 cameras both internal and external to the factory. They were professional through the quotation and installation process and have been supportive with their after sales service. Based on our experience we would have no hesitation in recommending COLETEK to anyone searching for customised surveillance camera solution.
Founded in 2001, we are a multiple award winning, highly experienced multidisciplinary company specialising in lean product development through rapid prototyping - transforming ideas from concept to life. Our industry-leading team combines deep expertise, cutting-edge technology, and advanced equipment to validate emerging ideas—transforming them into market-ready hardware and software solutions.
Our experience dates back to the 1990s with ANU "Robotics Systems Lab", CSIRO, NICTA (aka Data61), Seeing Machines, Location Aware Technologies, and Hemisphere GPS (aka BEELINE). For over 10 years now, we've been focused on validating R&D and taking ideas to commercialisation.
Useful Links
Location
Servicing worldwide, notably:
Australia, NZ, UK, USA, Canada, Europe, UAE, and Asia