We provide rapid plastic injection moulding tools and plastic injection moulding parts in various industries. For a quick turnaround we can make an aluminium mould which cuts the lead-time and cost, but does no compromise quality. Additionally, we can use a “Master Unit Die”. Using this method, quality moulds can be produced with a very short lead-time at a very competitive price. Rapid injection tooling is often used as a “bridge” between plastic prototypes and production injection moulded parts. We pride ourselves on our excellent communication and customer focused mentality.
Rapid Injection moulding means that we can make a simple injection mould at lower cost, shorter lead time compared againt the mass production moulds without sacrifice product quality. The rapid injection mould is commonly used to fill in the gap between the rapid prototype and mass production parts, this is a proved better way to produce customized plastic products at low volume, or to further evalute product design and process capability of a new product before mass production.
Design For Manufacturing
Design For Manufacturing (DFM) is an essential part of the product development cycle. This process is always best carried out at the design/prototype stage, in order to keep overall product manufacturing cost to a minimum. We will do this as a matter of course for all rapid injection tooling inquiries.
There is no substitute for experience, and our experience has taught us to make moulds in a metal on condition for critical areas. Once the DFM is complete and mould layout is agreed, including position and type of gate, ejector pins position and parting line position are agreed, we make a mould and aim for holes to be small and walls to be thin, so that we can finely adjust the sizes to create parts of the correct geometry quickly. This way, we can get first off samples to you, and on your desk in a matter of days, often as quickly as 7-10 days if time is critical.
Surface Texture
Textures on a plastic product give a part the appearance of sandblasting, wood, leather or others effect designed by customer. If you require your parts to be textured, please just send us the specification, like Mold-Tech texture standards. We can apply textures of all kinds normally used in plastic injection moulding. For the rapid tooling, If you do not have specific requirement of your product appearance, we can apply direct sandblasting with different media size on the mould, this is a quick and cost effective way for rapid injection moulds.
Plastic Material Selection
We can produce parts in most kinds of injection mould-able plastics including a wide selection of engineering plastics for high performance components and also all general plastic materials. We can also provide 2 shot parts and over moulded parts according to your needs. In addition to plastic parts, we also provide compression and injection moulded rubber parts in a wide rage of materials including: EPDM, FKM, NBR, PU, Q, to name a few!
Rapid injection moulding process or moulded plastic products are widely applied in many industries, including most of commerical products, like home appliance industry, office accessories industry, electrical tools, auto industries and electronic devices.
| Material Name | Density | Shrink Rate% |
| ABS (Acrylonitrile Butadiene Styrene) | 1.05 – 1.18 | 0.50- 0.70 |
| PP (Polypropylene) | 0.90 – 0.92 | 1.00 – 2.50 |
| PC (Polycarbonate) | 1.18 – 1.22 | 0.50 – 0.80 |
| PA/Nylon (Polyamide) | 1.05 – 1.15 | 0.80 – 2.20 |
| PVC (Polyvinyl Chloride) | 1.10 – 1.70 | 0.30 – 1.30 |
| POM (Polyoxymethylene) | 1.40 – 1.42 | 0.20 – 0.25 |
| PMMA (Polymethyl methacrylate) | 1.17 – 1.20 | 0.20 – 0.60 |
| HDPE (High Density Polyethylene) | 0.94 – 0.97 | 1.50 – 3.00 |
Succeeding in Carlingford, New South Wales, Australia with COLETEK's Engineering Expertise
Let’s build something remarkable together.
Contact UsInjection Moulding Services for Carlingford – Our Clients: Big Brands & Small Businesses
Injection Moulding Services for Carlingford – Amazing Customer Testimonials
I was grateful to find Luke Cole at COLETEK in the early days of an invention idea. He was very patient and generous with information to guide me along the way. And even though I did not preceed with my project, I would still recommend his services. Thank you.
Intuitive, innovative & efficient are three words that would appropriately describe the COLETEK service. Luke and the team at COLETEK have taken our concepts to the next level.
COLETEK have provided one to one communication throughout the development process and gone above and beyond in bringing our ideas closer to becoming a reality! Luke's expertise and knowledge with computer software and electronics is Jedi like, but what I liked most about working with him was his willingness and ability to think outside of the box.
As the proprietor a DIY environmentally pest control products business I have been more then impressed with COLETEK's design capability and professionalism in assisting to realise an idea into reality. From concept, CAD drawings, 3D modelling, alterations right through to the finished product. I am extremely happy with our new termite control product. I have no hesitation in recommending COLETEK's services.
We have used COLETEK on a couple of occasions and found their service to be professional and on time. We specialise in engineering and design of height safety equipment and since a lot of parts are made by casting from stainless steel we require a quick model before we proceed with the tool manufacture. COLETEK has been able to provide this quickly saving us valuable time and giving us peace of mind knowing our parts will look right when casted from stainless steel.
I have been working closely with COLETEK for the past 6 years now, and I must say, it is a success story :-). I highly respect their team, they are a pleasure to work with and top skilled professionals. In addition to their top Technical service, their customer service is brilliant and it is a rare find. Their PCB repair rework skills are top notch and a rare find in this industry. I have been working in the IT industry for the past 20 years in various fields and seen it all so I can say with certainty that they are the best around and I am looking forward to keep working with them in the future.
Founded in 2001, we are a multiple award winning, highly experienced multidisciplinary company specialising in lean product development through rapid prototyping - transforming ideas from concept to life. Our industry-leading team combines deep expertise, cutting-edge technology, and advanced equipment to validate emerging ideas—transforming them into market-ready hardware and software solutions.
Our experience dates back to the 1990s with ANU "Robotics Systems Lab", CSIRO, NICTA (aka Data61), Seeing Machines, Location Aware Technologies, and Hemisphere GPS (aka BEELINE). For over 10 years now, we've been focused on validating R&D and taking ideas to commercialisation.
Useful Links
Location
Servicing worldwide, notably:
Australia, NZ, UK, USA, Canada, Europe, UAE, and Asia