We provide rapid plastic injection moulding tools and plastic injection moulding parts in various industries. For a quick turnaround we can make an aluminium mould which cuts the lead-time and cost, but does no compromise quality. Additionally, we can use a “Master Unit Die”. Using this method, quality moulds can be produced with a very short lead-time at a very competitive price. Rapid injection tooling is often used as a “bridge” between plastic prototypes and production injection moulded parts. We pride ourselves on our excellent communication and customer focused mentality.
Rapid Injection moulding means that we can make a simple injection mould at lower cost, shorter lead time compared againt the mass production moulds without sacrifice product quality. The rapid injection mould is commonly used to fill in the gap between the rapid prototype and mass production parts, this is a proved better way to produce customized plastic products at low volume, or to further evalute product design and process capability of a new product before mass production.
Design For Manufacturing
Design For Manufacturing (DFM) is an essential part of the product development cycle. This process is always best carried out at the design/prototype stage, in order to keep overall product manufacturing cost to a minimum. We will do this as a matter of course for all rapid injection tooling inquiries.
There is no substitute for experience, and our experience has taught us to make moulds in a metal on condition for critical areas. Once the DFM is complete and mould layout is agreed, including position and type of gate, ejector pins position and parting line position are agreed, we make a mould and aim for holes to be small and walls to be thin, so that we can finely adjust the sizes to create parts of the correct geometry quickly. This way, we can get first off samples to you, and on your desk in a matter of days, often as quickly as 7-10 days if time is critical.
Surface Texture
Textures on a plastic product give a part the appearance of sandblasting, wood, leather or others effect designed by customer. If you require your parts to be textured, please just send us the specification, like Mold-Tech texture standards. We can apply textures of all kinds normally used in plastic injection moulding. For the rapid tooling, If you do not have specific requirement of your product appearance, we can apply direct sandblasting with different media size on the mould, this is a quick and cost effective way for rapid injection moulds.
Plastic Material Selection
We can produce parts in most kinds of injection mould-able plastics including a wide selection of engineering plastics for high performance components and also all general plastic materials. We can also provide 2 shot parts and over moulded parts according to your needs. In addition to plastic parts, we also provide compression and injection moulded rubber parts in a wide rage of materials including: EPDM, FKM, NBR, PU, Q, to name a few!
Rapid injection moulding process or moulded plastic products are widely applied in many industries, including most of commerical products, like home appliance industry, office accessories industry, electrical tools, auto industries and electronic devices.
| Material Name | Density | Shrink Rate% |
| ABS (Acrylonitrile Butadiene Styrene) | 1.05 – 1.18 | 0.50- 0.70 |
| PP (Polypropylene) | 0.90 – 0.92 | 1.00 – 2.50 |
| PC (Polycarbonate) | 1.18 – 1.22 | 0.50 – 0.80 |
| PA/Nylon (Polyamide) | 1.05 – 1.15 | 0.80 – 2.20 |
| PVC (Polyvinyl Chloride) | 1.10 – 1.70 | 0.30 – 1.30 |
| POM (Polyoxymethylene) | 1.40 – 1.42 | 0.20 – 0.25 |
| PMMA (Polymethyl methacrylate) | 1.17 – 1.20 | 0.20 – 0.60 |
| HDPE (High Density Polyethylene) | 0.94 – 0.97 | 1.50 – 3.00 |
Welcome to COLETEK: Your Partner in Engineering and Product Development for Avonmore, Victoria, Australia
Are you a business in Avonmore, Victoria, Australia looking for innovative solutions to drive growth? You're in the right place! At COLETEK, we're proud to be a multidisciplinary Australian engineering and product development company established in 2001. Our team has extensive experience in designing, developing, and delivering cutting-edge products that meet the unique needs of businesses like yours.
Based in Avonmore, Victoria, Australia, we've earned a reputation for being reliable, collaborative, and capable partners to our clients. Over the years, we've supported numerous businesses across Avonmore, Victoria, Australia, providing tailored engineering and product development solutions that have improved their operations, increased efficiency, and enhanced customer experiences.
What sets us apart is our holistic approach to engineering and product development. We believe in putting the needs of your business at the forefront, working closely with you to understand your objectives, challenges, and aspirations. Our expertise spans multiple disciplines, including mechanical engineering, electrical engineering, and systems integration, allowing us to deliver comprehensive solutions that meet your unique requirements.
Operating throughout Avonmore, Victoria, Australia, we've had the privilege of working with a diverse range of clients from various industries. From automotive and aerospace to healthcare and technology, our team has successfully developed products that have made a real impact on people's lives.
We're not just an engineering company – we're a trusted partner who will guide you through every stage of product development, ensuring that your needs are met, and your expectations exceeded. Whether you're looking to bring a new product to market or revamp your current offerings, our team is ready to collaborate with you to achieve remarkable results.
At COletek, serving businesses across Avonmore, Victoria, Australia is at the heart of what we do. We're committed to delivering innovative engineering and product development solutions that drive growth, improve efficiency, and enhance customer experiences. Let us help you build something remarkable together!
