Injection Moulding Services for Mount Wallace

Design For Manufacturing (DFM) is an essential part of the product development cycle. This process is always best carried out at the design/prototype stage, in order to keep overall product manufacturing cost to a minimum. We will do this as a matter of course for all rapid injection tooling inquiries.

There is no substitute for experience, and our experience has taught us to make moulds in a metal on condition for critical areas. Once the DFM is complete and mould layout is agreed, including position and type of gate, ejector pins position and parting line position are agreed, we make a mould and aim for holes to be small and walls to be thin, so that we can finely adjust the sizes to create parts of the correct geometry quickly. This way, we can get first off samples to you, and on your desk in a matter of days, often as quickly as 7-10 days if time is critical.

Textures on a plastic product give a part the appearance of sandblasting, wood, leather or others effect designed by customer. If you require your parts to be textured, please just send us the specification, like Mold-Tech texture standards. We can apply textures of all kinds normally used in plastic injection moulding. For the rapid tooling, If you do not have specific requirement of your product appearance, we can apply direct sandblasting with different media size on the mould, this is a quick and cost effective way for rapid injection moulds.

We can produce parts in most kinds of injection mould-able plastics including a wide selection of engineering plastics for high performance components and also all general plastic materials. We can also provide 2 shot parts and over moulded parts according to your needs. In addition to plastic parts, we also provide compression and injection moulded rubber parts in a wide rage of materials including: EPDM, FKM, NBR, PU, Q, to name a few!

Rapid injection moulding process or moulded plastic products are widely applied in many industries, including most of commerical products, like home appliance industry, office accessories industry, electrical tools, auto industries and electronic devices.

Material Name	Density	Shrink Rate%
ABS (Acrylonitrile Butadiene Styrene)	1.05 – 1.18	0.50- 0.70
PP (Polypropylene)	0.90 – 0.92	1.00 – 2.50
PC (Polycarbonate)	1.18 – 1.22	0.50 – 0.80
PA/Nylon (Polyamide)	1.05 – 1.15	0.80 – 2.20
PVC (Polyvinyl Chloride)	1.10 – 1.70	0.30 – 1.30
POM (Polyoxymethylene)	1.40 – 1.42	0.20 – 0.25
PMMA (Polymethyl methacrylate)	1.17 – 1.20	0.20 – 0.60
HDPE (High Density Polyethylene)	0.94 – 0.97	1.50 – 3.00

In the heart of Victoria, Australia, our team at COLETEK is dedicated to empowering businesses in Mount Wallace and beyond with innovative engineering and product development solutions. As a multidisciplinary engineering company established in 2001, we've built a reputation nationwide for reliability, collaboration, and capability. Our experience spans over two decades, during which time we've developed a deep understanding of the unique needs and challenges faced by businesses operating in Mount Wallace, Victoria, Australia. From manufacturers to service providers, and from startups to long-established organizations, our expertise has helped various entities thrive in this region and throughout Australia. As a trusted partner for businesses across Mount Wallace, Victoria, Australia, we take pride in our ability to understand the specific complexities and requirements of each project. Our collaborative approach fosters open communication and ensures that our solutions align seamlessly with your objectives. Whether you're looking to improve operational efficiency, enhance product offerings, or stay ahead of the competition, COLETEK's engineering expertise can help you achieve your goals. Our capabilities extend across an array of industries and sectors, from manufacturing and logistics to healthcare and technology. By leveraging a multidisciplinary team comprising engineers, designers, and developers, we're able to bring innovative ideas to life quickly, efficiently, and effectively. In Mount Wallace, Victoria, Australia, this means that local businesses can access cutting-edge engineering and product development capabilities without sacrificing time zones or local connections. At COLETEK, we're committed to empowering businesses in Mount Wallace, Victoria, Australia with the expertise, resources, and support needed to succeed in today's fast-paced business environment. By partnering with us, you'll gain access to a trusted, experienced partner that can help you overcome the unique challenges faced by businesses operating in this region.