We provide rapid plastic injection moulding tools and plastic injection moulding parts in various industries. For a quick turnaround we can make an aluminium mould which cuts the lead-time and cost, but does no compromise quality. Additionally, we can use a “Master Unit Die”. Using this method, quality moulds can be produced with a very short lead-time at a very competitive price. Rapid injection tooling is often used as a “bridge” between plastic prototypes and production injection moulded parts. We pride ourselves on our excellent communication and customer focused mentality.
Rapid Injection moulding means that we can make a simple injection mould at lower cost, shorter lead time compared againt the mass production moulds without sacrifice product quality. The rapid injection mould is commonly used to fill in the gap between the rapid prototype and mass production parts, this is a proved better way to produce customized plastic products at low volume, or to further evalute product design and process capability of a new product before mass production.
Design For Manufacturing
Design For Manufacturing (DFM) is an essential part of the product development cycle. This process is always best carried out at the design/prototype stage, in order to keep overall product manufacturing cost to a minimum. We will do this as a matter of course for all rapid injection tooling inquiries.
There is no substitute for experience, and our experience has taught us to make moulds in a metal on condition for critical areas. Once the DFM is complete and mould layout is agreed, including position and type of gate, ejector pins position and parting line position are agreed, we make a mould and aim for holes to be small and walls to be thin, so that we can finely adjust the sizes to create parts of the correct geometry quickly. This way, we can get first off samples to you, and on your desk in a matter of days, often as quickly as 7-10 days if time is critical.
Surface Texture
Textures on a plastic product give a part the appearance of sandblasting, wood, leather or others effect designed by customer. If you require your parts to be textured, please just send us the specification, like Mold-Tech texture standards. We can apply textures of all kinds normally used in plastic injection moulding. For the rapid tooling, If you do not have specific requirement of your product appearance, we can apply direct sandblasting with different media size on the mould, this is a quick and cost effective way for rapid injection moulds.
Plastic Material Selection
We can produce parts in most kinds of injection mould-able plastics including a wide selection of engineering plastics for high performance components and also all general plastic materials. We can also provide 2 shot parts and over moulded parts according to your needs. In addition to plastic parts, we also provide compression and injection moulded rubber parts in a wide rage of materials including: EPDM, FKM, NBR, PU, Q, to name a few!
Rapid injection moulding process or moulded plastic products are widely applied in many industries, including most of commerical products, like home appliance industry, office accessories industry, electrical tools, auto industries and electronic devices.
| Material Name | Density | Shrink Rate% |
| ABS (Acrylonitrile Butadiene Styrene) | 1.05 – 1.18 | 0.50- 0.70 |
| PP (Polypropylene) | 0.90 – 0.92 | 1.00 – 2.50 |
| PC (Polycarbonate) | 1.18 – 1.22 | 0.50 – 0.80 |
| PA/Nylon (Polyamide) | 1.05 – 1.15 | 0.80 – 2.20 |
| PVC (Polyvinyl Chloride) | 1.10 – 1.70 | 0.30 – 1.30 |
| POM (Polyoxymethylene) | 1.40 – 1.42 | 0.20 – 0.25 |
| PMMA (Polymethyl methacrylate) | 1.17 – 1.20 | 0.20 – 0.60 |
| HDPE (High Density Polyethylene) | 0.94 – 0.97 | 1.50 – 3.00 |
Transform Your Business in Nichols Point, Victoria, Australia with COLETEK's Expertise
We're thrilled to have worked with numerous businesses in Nichols Point, Victoria, Australia, and across the nation, supporting their growth and innovation. As a multidisciplinary Australian engineering and product development company established in 2001, we're proud of our reputation as a trusted partner for forward-thinking organizations.
Based in Nichols Point, Victoria, Australia, our team is dedicated to delivering exceptional results that exceed expectations. Whether you're looking to develop cutting-edge products or streamline your operations, we're here to collaborate with you every step of the way. Our multidisciplinary approach brings together experts from various engineering and product development disciplines, ensuring that your project receives a comprehensive, innovative solution.
As a trusted partner in Nichols Point, Victoria, Australia, and throughout Australia, we take pride in our reliability, adaptability, and passion for delivering high-quality outcomes. Our capabilities span across diverse industries and sectors, from healthcare to manufacturing, and we're committed to helping businesses like yours thrive in today's fast-paced economic environment.
At COLETEK, we understand the unique challenges and opportunities that come with operating in Nichols Point, Victoria, Australia. That's why we're dedicated to providing tailored solutions that cater to your specific needs and goals. Whether you're seeking to improve operational efficiency, enhance product development capabilities, or innovate your business model, we'll work closely with you to identify areas of improvement and develop strategies for long-term growth.
So why wait? Let us bring our expertise to the table and help drive your vision forward. Operating throughout Australia, including Nichols Point, Victoria, Australia, we're ready to collaborate with local businesses, just like yours, to achieve remarkable results. Take the first step towards unlocking your full potential – get in touch with us today.
